The Technology HouseSea, Air and Space

Archive for January, 2014

What is Desktop 3D Printing?

Posted on: January 27th, 2014 by The Technology House

Desktop 3D printing offers one of the fastest and most affordable ways to fabricate prototypes. Prototypes generated from desktop 3D printers are ideal for initial design review. In addition, Desktop 3D printing is beneficial to people who need small gadget accessories. Gadget accessories can be customized to fit your needs and personality. Parts can be printed in a number of different colored plastics, such as red, orange, yellow, green, blue, purple, white, and black.

3D printed aircraft carrier

CLICK HERE to learn more about desktop 3D printing and other available 3D printing processes.

3D printed ships

Molding Series Part I: Cast Urethane vs. Injection Molding

Posted on: January 10th, 2014 by The Technology House

When deciding which process fits best, it is important first to consider many process attributes. Below are the main considerations you should consider before deciding between cast urethane and injection molding. Keep in mind that part design, size, material and finish play a major factor when considering which process is best for volumes, lead time and costs.

Cast urethane molds

Volumes
Urethane molding can be used for prototype, bridge and production of low volumes from one part to hundreds of parts.
Injection molding can be used for prototype or bridge, but mostly used for high volume production of hundreds to tens of thousands.

Standard Lead Times
Urethane samples in 3-4 weeks (1-10 parts can be molded per day)
Injection molded samples in 6-8 weeks (100’s of parts can be molded per day)
All lead times are dependent upon material, finish, part design and part size.

Tooling Costs
Urethane tooling cost range from hundreds to thousands of dollars
Injection mold tooling costs range from a couple thousand to tens of thousands of dollars

Part Cost
Urethane molding costs are much higher than injection molded parts because urethane molding is a much more labor intensive process, while injection molding can be more automated.

Tolerance
Urethane tolerances are +/-.010” for the first inch, and +/-.005” for every inch afterwards.
Injection molding tolerances are +/.005” for the first inch, and +/-.002” for every inch afterwards.

Materials
Urethane molding uses polyurethanes to mimic an injection mold grade production plastic, whereas injection molding uses the actual production plastics. Both processes can mold both rigid and soft durometers. Parts can be molded in standard colors, custom color matched, and/or textured in both processes. Even MR, UL, and FDA materials are available for urethane as well as injection molding. In addition, both processes can over-mold onto plastic or metal components.

Mold for Injection Molding

It is important that parts are designed appropriately to meet the process requirements. For example wall thickness and draft need to be reviewed before parts are made. Each process has its benefits for use and both processes can yield prototypes or production parts.

If you want to learn more about urethane molding,CLICK HERE.

If you wish to learn more about custom injection molding, CLICK HERE.